(423) 586-5650  |  Contact Us
Catalogs Order History & Status Statements Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Electrical Rough Electrical Electrical Fittings EMT Metal Conduit Fittings EMT Fittings - Set Screw 772 EMT OFFSET CONNECTOR 3/4IN Z

772 EMT OFFSET CONNECTOR 3/4IN Z

PART 709832
SUPPLIER SOUTHWIRE COMPANY, LLC
SUPPLIER PART # 772
RANK D
SHELF PACK 10
Calculating price...
QUANTITY

About this item

Set Screw Connector, 3/4 in, Die Cast Zinc

Features:

  • Material: Die-cast zinc
  • Size: 3/4 inch
  • Type: Offset connector
  • Usage: Connects EMT conduit to metal outlet boxes or enclosures
  • Compliance: UL Standard 514B, NEMA FB-1
  • Concrete Tight: When taped 

Applications:

  1. Connecting EMT Conduit to Metal Outlet Boxes: It is primarily used to connect EMT conduit to metal outlet boxes or enclosures, ensuring a secure and reliable connection 
  2. Commercial and Residential Wiring: Commonly used in both commercial and residential electrical installations to maintain the integrity of the conduit system 
  3. Concrete Tight Applications: When taped, it provides concrete-tight protection, making it suitable for installations where a secure and moisture-resistant connection is required 
  4. Indoor Electrical Systems: Specifically designed for indoor use, ensuring a reliable connection between EMT conduit and electrical boxes 

Instructions:

  1. Preparation:

    • Ensure the ends of the EMT conduit are clean and free from burrs.
    • Measure and cut the conduit to the desired length.

  2. Assembly:

    • Insert the EMT conduit into the offset connector until it reaches the stop.
    • Tighten the set screw on the connector to secure the conduit.

  3. Connection to Box:

    • Insert the threaded end of the connector into the knockout hole of the electrical box.
    • Secure the connector to the box using the provided locknut. Tighten the locknut with a wrench to ensure a firm connection.

  4. Inspection:

    • Check the connection to ensure it is tight and secure.
    • Verify that the connector is properly aligned with the conduit and the box 

Tools Required:

  1. Pipe Cutter or Hacksaw: To cut the EMT conduit to the desired length.
  2. Deburring Tool: To remove any burrs from the cut ends of the conduit.
  3. Screwdriver: To tighten the set screws on the connector.
  4. Wrench: To tighten the locknut when securing the connector to the electrical box.
  5. Tape Measure: To measure the conduit lengths accurately.
  6. Level: To ensure the conduit is installed straight and level

There are currently no resources for this product.

Diameter 3/4 Inch
Color Silver
Brand Topaz Electric
10 1
Material Die Cast Zinc
Trade Size 3/4 in
UPC Code 751338179707
Shelf Pack 10
Minimum Order Qty 1
Supplier Name SOUTHWIRE COMPANY
Supplier Short Name Topaz Lig.
Supplier Address 1 925 Waverly Avenue
Supplier City 1 Southwire Drive Carrollton
Supplier State GA
Supplier Zip 30119
Country US
Supplier Email hardwarecustomerservice@southwire.com
Supplier Url www.southwire.com
Buyer Name Michael Heck
Supplier Phone 404-620-7823
Supplier Fax 770-832-4491
Our Customer Id 50076
Return Policy Call Factory for RGA
Product Lines Electrical
Rep Name Bennett Limbaugh
Rep Address 5690 Watermelon Rd Ste 600 Northport, AL 35473
Rep Phone 888-603-6858
Rep Cell 888-603-6858
Rep Fax 800-690-7996
Rep Email scollins@salesgroupsouth.com
Rep Agency Davenport and Associates