(423) 586-5650  |  Contact Us
Catalogs Order History & Status Statements Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Electrical Rough Electrical Electrical Fittings EMT Metal Conduit Fittings EMT Fittings - Elbows 86 EMT 90D ELBOW 2IN GALVANIZED STEEL

86 EMT 90D ELBOW 2IN GALVANIZED STEEL

PART 709468
SUPPLIER SOUTHWIRE COMPANY, LLC
SUPPLIER PART # 86
RANK C
SHELF PACK 10
Calculating price...
QUANTITY

About this item

EMT Conduit Elbow, 2 in, Threaded, 90 deg, Galvanized Steel, Hot Dipped Galvanized, 4.1875 in Bend Radius, Material Standard: ANSI C80.1, Standards: UL and cULus Listed, 14.031 in Offset

Features:

  • Material: Galvanized steel
  • Size: 2 inches
  • Type: 90° conduit elbow
  • Usage: Joins EMT conduit at a 90-degree angle
  • Compliance: UL Standard 514B, NEMA FB-1
  • Concrete Tight: When taped
  • Diameter: 2.938 inches
  • Features: Low conductivity, high corrosion resistance, smooth defect-free interior and exterior

Applications:

  1. Directional Changes: It is primarily used to change the direction of EMT conduit runs by 90 degrees, ensuring a smooth and secure transition  
  2. Commercial and Residential Wiring: Commonly used in both commercial and residential electrical installations to maintain the integrity of the conduit system 
     
  3. Concrete Tight Applications: When taped, it provides concrete-tight protection, making it suitable for installations where a secure and moisture-resistant connection is required 
     
  4. Indoor Electrical Systems: Specifically designed for indoor use, ensuring a reliable connection between EMT conduit sections 

Installation:

  1. Preparation:

    • Ensure the ends of the EMT conduit are clean and free from burrs.
    • Measure and cut the conduit to the desired length.

  2. Assembly:

    • Insert one end of the EMT conduit into the elbow until it reaches the stop.
    • Repeat the process for the other end of the elbow with the second piece of conduit.

  3. Tightening:

    • Use a wrench to tighten any compression nuts if applicable.
    • Ensure the connection is secure and concrete-tight if required (by taping the elbow).

  4. Inspection:

    • Check the connection to ensure it is tight and there are no gaps.
    • Verify that the elbow is properly aligned with the conduit 
       

Tools Required:

  1. Pipe Cutter or Hacksaw: To cut the EMT conduit to the desired length.
  2. Deburring Tool: To remove any burrs from the cut ends of the conduit.
  3. Wrench: To tighten any compression nuts if applicable.
  4. Tape Measure: To measure the conduit lengths accurately.
  5. Level: To ensure the conduit is installed straight and level 

There are currently no resources for this product.

Brand Topaz Electric
Diameter 2 Inch
Finish Hot Dipped Galvanized
Color Silver
10 1
Angle 90 deg
Bend Radius 4.1875 in
Connection Type Threaded
Material Galvanized Steel
Material Standard ANSI C80.1
Trade Size 2 in
UPC Code 751338304703
Shelf Pack 10
Minimum Order Qty 1
Supplier Name SOUTHWIRE COMPANY
Supplier Short Name Topaz Lig.
Supplier Address 1 925 Waverly Avenue
Supplier City 1 Southwire Drive Carrollton
Supplier State GA
Supplier Zip 30119
Country US
Supplier Email hardwarecustomerservice@southwire.com
Supplier Url www.southwire.com
Buyer Name Michael Heck
Supplier Phone 404-620-7823
Supplier Fax 770-832-4491
Our Customer Id 50076
Return Policy Call Factory for RGA
Product Lines Electrical
Rep Name Bennett Limbaugh
Rep Address 5690 Watermelon Rd Ste 600 Northport, AL 35473
Rep Phone 888-603-6858
Rep Cell 888-603-6858
Rep Fax 800-690-7996
Rep Email scollins@salesgroupsouth.com
Rep Agency Davenport and Associates