(423) 586-5650  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Electrical Rough Electrical Electrical Fittings EMT Metal Conduit Fittings 86 EMT 90D ELBOW 2IN GALVANIZED STEEL

86 EMT 90D ELBOW 2IN GALVANIZED STEEL

PART 709468
SUPPLIER SOUTHWIRE COMPANY, LLC
SUPPLIER PART # 86
RANK C
SHELF PACK 10
Calculating price...
QUANTITY

About this item

EMT Conduit Elbow, 2 in, Threaded, 90 deg, Galvanized Steel, Hot Dipped Galvanized, 4.1875 in Bend Radius, Material Standard: ANSI C80.1, Standards: UL and cULus Listed, 14.031 in Offset

Features:

  • Material: Galvanized steel
  • Size: 2 inches
  • Type: 90° conduit elbow
  • Usage: Joins EMT conduit at a 90-degree angle
  • Compliance: UL Standard 514B, NEMA FB-1
  • Concrete Tight: When taped
  • Diameter: 2.938 inches
  • Features: Low conductivity, high corrosion resistance, smooth defect-free interior and exterior

Applications:

  1. Directional Changes: It is primarily used to change the direction of EMT conduit runs by 90 degrees, ensuring a smooth and secure transition  
  2. Commercial and Residential Wiring: Commonly used in both commercial and residential electrical installations to maintain the integrity of the conduit system 
     
  3. Concrete Tight Applications: When taped, it provides concrete-tight protection, making it suitable for installations where a secure and moisture-resistant connection is required 
     
  4. Indoor Electrical Systems: Specifically designed for indoor use, ensuring a reliable connection between EMT conduit sections 

Installation:

  1. Preparation:

    • Ensure the ends of the EMT conduit are clean and free from burrs.
    • Measure and cut the conduit to the desired length.

  2. Assembly:

    • Insert one end of the EMT conduit into the elbow until it reaches the stop.
    • Repeat the process for the other end of the elbow with the second piece of conduit.

  3. Tightening:

    • Use a wrench to tighten any compression nuts if applicable.
    • Ensure the connection is secure and concrete-tight if required (by taping the elbow).

  4. Inspection:

    • Check the connection to ensure it is tight and there are no gaps.
    • Verify that the elbow is properly aligned with the conduit 
       

Tools Required:

  1. Pipe Cutter or Hacksaw: To cut the EMT conduit to the desired length.
  2. Deburring Tool: To remove any burrs from the cut ends of the conduit.
  3. Wrench: To tighten any compression nuts if applicable.
  4. Tape Measure: To measure the conduit lengths accurately.
  5. Level: To ensure the conduit is installed straight and level 

There are currently no resources for this product.

Color Silver
Finish Hot Dipped Galvanized
Brand Topaz Electric
10 1
Angle 90 deg
Bend Radius 4.1875 in
Connection Type Threaded
Material Galvanized Steel
Material Standard ANSI C80.1
Trade Size 2 in
UPC Code 751338304703
Shelf Pack 10
Minimum Order Qty 1
Supplier Name Topaz Lighting
Supplier Short Name Topaz Lig.
Supplier Address 1 925 Waverly Avenue
Supplier City Holtsville
Supplier State NY
Supplier Zip 11742
Country US
Supplier Email dadria@davenportassoc.com
Buyer Name Michael Heck
Supplier Phone 631-758-5507
Our Customer Id 50076
Return Policy Call Factory for RGA
Product Lines Electrical
Rep Name Dadria Pernell
Rep Address 823 Cowan Street Nashville, TN 37207
Rep Phone 800-264-5758
Rep Cell 865-599-8867
Rep Fax 800-264-9238
Rep Email dadria@davenportassoc.com
Rep Agency Davenport and Associates