(423) 586-5650  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Plumbing Rough Plumbing Supplies Pipe Fittings PVC - DWV SCH 40 Fittings PVC - DWV SCH 40 Elbows PVC 00324 1000HA DWV ELBOW HUB WHT PVC 3IN

PVC 00324 1000HA DWV ELBOW HUB WHT PVC 3IN

PART 662895
SUPPLIER CHARLOTTE PIPE AND FOUNDRY
SUPPLIER PART # PVC 00324 1000HA
RANK A
SHELF PACK 20
Calculating price...
QUANTITY

About this item

DWV Elbow, 3 in Nominal, 22.5 deg Angle, Hub, White, PVC, SCH 30 Schedule, 140 deg F

Features:

    • Material: PVC (Polyvinyl Chloride)
    • Angle: 22-1/2 degrees
    • Connection Type: Hub x Hub
    • Size: Available in various sizes, including 3 inches and 8 inches 
    • Maximum Working Temperature: 140°F 
    • Standards: Conforms to ASTM D 1784, ASTM D 2665, ASTM D 3311, and NSF 14
    • The Charlotte Pipe PVC 00324 is specifically designed for drain, waste, and vent (DWV) applications and is not intended for pressure use. 
    • It is used in gravity-fed waste elimination systems and has a maximum working temperature of 140°F

     

Installation:

  1. Preparation: Ensure you have all necessary tools and materials, including PVC primer and cement, a saw for cutting pipe, and safety equipment.
  2. Cutting: Measure and cut the PVC pipe to the required length using a saw. Ensure the cuts are clean and square.
  3. Cleaning: Clean the ends of the pipe and the inside of the fitting with a PVC cleaner to remove any dirt or debris.
  4. Priming: Apply PVC primer to the outside of the pipe end and the inside of the fitting. Allow it to dry for a few seconds.
  5. Cementing: Apply PVC cement to the primed areas. Quickly insert the pipe into the fitting and twist slightly to ensure an even distribution of cement.
  6. Setting: Hold the pipe and fitting together for a few seconds to allow the cement to set. Wipe off any excess cement.
  7. Inspection: Check the joint to ensure it is secure and properly aligned. Allow the cement to cure according to the manufacturer's instructions before using the system 

Tools Required:

  1. aw: To cut the PVC pipe to the required length.
  2. PVC Primer: To clean and prepare the pipe and fitting surfaces.
  3. PVC Cement: To bond the pipe and fitting securely.
  4. Tape Measure: To measure the pipe accurately.
  5. Marker: To mark the cutting points on the pipe.
  6. Safety Equipment: Gloves and safety glasses to protect yourself during the installation

There are currently no resources for this product.

Color White
Brand Charlotte Pipe and Foundry Co
Size 3""
Nominal Size 3 in
Finish/Color White
20 1
Angle 22.5 deg
End Style Hub
Height 400
Length 600
Pack Qty 1
Weight 0.65
Width 500
UPC Code 611942034185
Shelf Pack 20
Minimum Order Qty 1
Supplier Name Charlotte Pipe and Foundry
Supplier Short Name Charlotte
Supplier Address 1 P.O. Box 277592
Supplier City Atlanta
Supplier State GA
Supplier Zip 30384
Country US
Supplier Email info@wallacehardware.com
Buyer Name Michael Heck
Supplier Phone (800) 438-6091
Supplier Fax (804) 348-9953
Return Policy Need RGA
Product Lines Pipe and Fittings
Rep Name Amanda Barbee
Rep Phone (704) 846-6029 ext 205
Rep Fax (704) 844-2690
Rep Email abarbee@mbamarketinginc.com
Rep Agency MBA Marketing