(423) 586-5650  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Electrical Rough Electrical Electrical Boxes Ceiling Boxes 54171-R-UPC 4"" X 2-1/8"" OCTAGON BOX

54171-R-UPC 4"" X 2-1/8"" OCTAGON BOX

PART 178867
SUPPLIER SOUTHWIRE COMPANY
SUPPLIER PART # 54171-R-UPC
RANK A
SHELF PACK 25
Calculating price...
QUANTITY

About this item

4"" Octagon Box, 2-1/8"" Deep - Drawn, W/Romex Clamps And Fixture Ears 3-1/2"" O.C.

Features:

  • Model Number: 54171-R
  • UPC: 785592982216
  • Dimensions: 4 inches wide x 2-1/8 inches deep
  • Material: Galvanized steel
  • Cubic Capacity: 20.0 cubic inches (327.8 cubic centimeters)
  • Weight: 0.695 lbs
  • Knockouts:
    • Bottom: (1) 1/2 inch
    • Sides: (2) 1/2 inch, (4) pryouts
  • Color: Silver
  • Standard Package: 25 units

Installation:

  1. Turn Off Power: Ensure the power to the area where you will be working is turned off at the circuit breaker.

  2. Prepare the Box:

    • Remove any necessary knockouts for wiring.
    • Attach the Romex clamps if they are not already installed.

  3. Mount the Box:

    • Position the box where you want to install it. This could be on a wall or ceiling.
    • Secure the box to a stud or joist using screws or nails through the mounting holes.

  4. Run the Wiring:

    • Feed the electrical cables through the clamps and into the box.
    • Tighten the clamps to secure the cables.

  5. Make the Connections:

    • Strip the insulation from the ends of the wires.
    • Connect the wires to the appropriate terminals on your fixture or device.
    • Use wire nuts to secure the connections and wrap them with electrical tape for added safety.

  6. Install the Fixture or Device:

    • Attach the fixture or device to the box using the provided screws.
    • Ensure everything is securely fastened and properly aligned.

  7. Test the Installation:

    • Turn the power back on at the circuit breaker.
    • Test the fixture or device to ensure it is working correctly.

  8. Final Checks:

    • Double-check all connections and ensure there are no exposed wires.
    • Make sure the box cover is securely in place.

Tools Required: 

  1. Screwdriver: A Phillips or flathead screwdriver for securing the box and making electrical connections.
  2. Wire Strippers: To strip the insulation from the ends of the wires.
  3. Pliers: Needle-nose pliers can be helpful for bending and twisting wires.
  4. Drill: If you need to create holes for mounting the box.
  5. Hammer: For driving nails if you're mounting the box to a stud or joist.
  6. Tape Measure: To ensure accurate placement and measurements.
  7. Level: To ensure the box is mounted straight.
  8. Electrical Tape: For wrapping wire connections.
  9. Wire Nuts: To secure wire connections.
  10. Voltage Tester: To ensure the power is off before starting work.

These tools will help you safely and effectively install the octagon box.

Safety:

  1. Turn Off Power: Always turn off the power at the circuit breaker before starting any electrical work to avoid electric shock.
  2. Use a Voltage Tester: Verify that the power is off by using a voltage tester on the wires you'll be working with.
  3. Wear Safety Gear: Use safety glasses to protect your eyes from debris and gloves to protect your hands.
  4. Work in a Well-Lit Area: Ensure your workspace is well-lit to avoid mistakes and accidents.
  5. Avoid Wet Conditions: Never work with electrical components in wet or damp conditions to prevent electric shock.
  6. Follow Manufacturer Instructions: Always follow the specific instructions provided by the manufacturer for the installation process.
  7. Secure the Box Properly: Make sure the box is securely mounted to a stud or joist to prevent it from coming loose.
  8. Check Wire Connections: Ensure all wire connections are secure and properly insulated with wire nuts and electrical tape.
  9. Use the Right Tools: Use the appropriate tools for the job to avoid damaging the components or injuring yourself.
  10. Inspect Your Work: Double-check all connections and the overall installation before turning the power back on.

By following these precautions, you can help ensure a safe and successful installation.

There are currently no resources for this product.

Brand Southwire
Size 4 Inch x 2-1/2 Inch
Shape Octagon
UPC Code 032886301926
Shelf Pack 25
Minimum Order Qty 1
Supplier Name Southwire Company
Supplier Short Name Southwire
Supplier Address 1 PO Box 1000
Supplier City Carrollton
Supplier State GA
Supplier Zip 30119
Country US
Supplier Email scollins@salesgroupsouth.com
Supplier Url www.southwire.com
Buyer Name Michael Heck
Supplier Phone (866) 706-9473
Supplier Fax (270) 524-4690
Our Customer Id 120998
Return Policy Return to Factory
Product Lines Electrical Wire
Rep Name Sam Collins
Rep Address 5690 Watermelon road Suite 600 Northport, AL 35473
Rep Phone (888) 603-6858
Rep Cell (205) 349-9131
Rep Fax (800) 690-7996
Rep Email scollins@salesgroupsouth.com
Rep Agency Sales Group South
Video